| Part
Number |
Description |
Technical
pdf Data Sheet |
| ZPS3/20/150 |
3kW
Laboratory Power Supply 0-20Vdc, 0-150A output |
 |
| ZPS3/36/85 |
3kW
Laboratory Power Supply 0-36Vdc, 0-85A output |
|
| ZPS3/48/85 |
3kW
Laboratory Power Supply 0-48Vdc, 0-65A output |
|
| ZPS3/72/45 |
3kW
Laboratory Power Supply 0-72Vdc, 0-45A output |
|
| ZPS3/96/35 |
3kW
Laboratory Power Supply 0-35Vdc, 0-96A output |
|
| ZPS3/140/25 |
3kW
Laboratory Power Supply 0-140Vdc, 0-25A output |
|
| ZPS3/300/10 |
3kW
Laboratory Power Supply 0-300Vdc, 0-10A output |
|
| ZPS6/36/160 |
6kW
Laboratory Power Supply 0-36Vdc, 0-160A output |
|
| ZPS6/48/120 |
6kW
Laboratory Power Supply 0-48Vdc, 0-120A output |
|
| ZPS6/52/115 |
6kW
Laboratory Power Supply 0-52Vdc, 0-115A output |
|
| ZPS6/72/80 |
6kW
Laboratory Power Supply 0-72Vdc, 0-80A output |
|
| ZPS6/96/60 |
6kW
Laboratory Power Supply 0-96Vdc, 0-60A output |
|
| ZPS6/120/50 |
6kW
Laboratory Power Supply 0-120Vdc, 0-50A output |
|
| ZPS6/140/42 |
6kW
Laboratory Power Supply 0-140Vdc, 0-42A output |
|
| ZPS10/20/400 |
10kW
Laboratory Power Supply 0-20Vdc, 0-400A output |
|
| ZPS10/36/280 |
10kW
Laboratory Power Supply 0-36Vdc, 0-280A output |
|
| ZPS10/48/210 |
10kW
Laboratory Power Supply 0-48Vdc, 0-210A output |
|
| ZPS10/52/190 |
10kW
Laboratory Power Supply 0-52Vdc, 0-190A output |
|
| ZPS10/72/140 |
10kW
Laboratory Power Supply 0-72Vdc, 0-140A output |
|
| ZPS10/96/105 |
10kW
Laboratory Power Supply 0-96Vdc, 0-105A output |
|
| ZPS10/140/72 |
10kW
Laboratory Power Supply 0-140Vdc, 0-72A output |
|
| ZPS6/150/50 |
7.5kW
Laboratory Power Supply 0-150Vdc, 0-50A output |
|
| ZPS10/400/25 |
10kW
Laboratory Power Supply 0-400Vdc, 0-25A output |
|
Product
Summary
The ZPS Series Power Supplies are available in 3kW, 6 kW
and 10kW sizes. The 3kW units operate from a 230Vac single phase supply, whilst
the 6 and 10kW units operated from a 400W three phase supply.
In addition to the front panel controls and display, external
remote control and
monitoring is available via analogue signals as standard, or via the optional
IEEE 488.2 interface which is supplied complete with LabVIEW drivers.
When two or three of the
same units are used together they can be configured for parallel or master-slave
operation and can therefore provide controllable DC power up to 30kW.
To find the unit most suited to your requirements simply
look in the model table above, or view the pdf
data sheet
If you require any more detailed information then please contact
us or fill out and submit the form below.
