|
| |
Programmable Power Supplies
- (Click on pictures to view)
- Product Range
-
-
LD Series
30W-1000W
- Linear regulated, High accuracy
- Voltage ranges from 0 - 7.5Vdc to
0 - 150Vdc, Current ranges from 0 - 0.5A to 0 - 20A
- Remote programming of
voltage and current, Remote sense, Parallel & master/slave operation.
- Optional IEEE 488.2 interface with LabVIEW driver
-
LPS Series
300W
- Linear regulated, High accuracy
- Voltage ranges from 0 - 15Vdc to 0
- 400Vdc, Current ranges from 0 - 0.8A to 0 - 20A
- Off line setting of
voltage and current, Remote programming of voltage and current, Remote
sense, Parallel & master/slave operation.
- Optional IEEE 488.2 interface
with LabVIEW driver
-
ZUP Series
200W-800W
- Low noise switched mode design
- Voltage ranges from 0 - 6Vdc to 0
- 120Vdc, Current ranges from 0 - 1.8A to 0 - 132A
- Remote programming and
monitoring of voltage and current, Built in RS232/485, Remote sense. Optional IEEE 488.2
interface
-
GEN Series
750W-1500W
- Low noise switched mode design
- Voltage ranges from 0 - 6Vdc to 0
- 600Vdc, Current ranges from 0 - 1.3A to 0 - 200A
- Remote programming and
monitoring of voltage and current, Built in RS232/485, Remote sense
- Optional IEEE 488.2
interface
-
XFR Series
1.2kW-2.8kW
- Low noise switched mode design
- Voltage ranges from 0 - 7.5Vdc to 0
- 600Vdc, Current ranges from 0 - 2A to 0 - 220A
- Remote programming and
monitoring of voltage and current, Remote sense
- Optional IEEE 488.2
interface
-
ZPS Series
3kW-30kW
- Low noise switched mode design
- Voltage ranges from 0 - 20Vdc to 0
- 400Vdc, Current ranges from 0 - 10A to 0 - 400A
- Remote programming and
monitoring of voltage and current, Remote sense, Parallel & master/slave
operation up to 3 units.
- Optional IEEE 488.2 interface with LabVIEW driver
-
LAB/TC Series 10kW-2MW
- Advanced IGBT based design
- Voltage ranges from 0 -
52Vdc to 0
- 1000Vdc, Current ranges from 0 - 13A to 0 - 700A
- Remote programming and
monitoring of voltage and current, Remote sense, Parallel operation up to
2MW, Built in RS232.
- Optional LabVIEW and C/C++
Product Summary
Our Laboratory Power Supplies range from 30 Watts up to
32kW and can be extended to 2 Mega Watts if required. Voltage ranges from 0 - 6Vdc to 0 -
1000Vdc, and
current ranges from 0 - 0.5A to 0 - 700A. Single or Dual output models are available, and
there is also the possibility to add an optional IEEE488.2 interface which is supplied
complete with a LabVIEW driver on most models.
For more information please select the
relevant link above or on the left of this page, or fill out and submit the form below.
|
