|
| |
Laboratory Power Supplies
(Click on pictures to view)
Our Laboratory Power Supplies range from 30 Watts up to
32kW and can be extended to 2 Mega Watts if required. Voltage ranges from 0 - 6Vdc to 0 -
1000Vdc, and
current ranges from 0 - 0.5A to 0 - 700A. Single or Dual output models are available, and
there is also the possibility to add an optional IEEE488.2 interface which is supplied
complete with a LabVIEW driver on most models. An overview of the ranges is below.
For more information please select the
relevant link below or on the left of this page, or fill out and submit the form below.
Laboratory Power Supplies - The Range
-
LD Series
30W-1000W
- Linear regulated, High accuracy
- Voltage ranges from 0 - 7.5Vdc to
0 - 150Vdc, Current ranges from 0 - 0.5A to 0 - 20A
- Remote programming of
voltage and current, Remote sense, Parallel & master/slave operation.
- Optional IEEE 488.2 interface with LabVIEW driver
-
LPS Series
300W
- Linear regulated, High accuracy
- Voltage ranges from 0 - 15Vdc to 0
- 400Vdc, Current ranges from 0 - 0.8A to 0 - 20A
- Off line setting of
voltage and current, Remote programming of voltage and current, Remote
sense, Parallel & master/slave operation.
- Optional IEEE 488.2 interface
with LabVIEW driver
-
ZUP Series
200W-800W
- Low noise switched mode design
- Voltage ranges from 0 - 6Vdc to 0
- 120Vdc, Current ranges from 0 - 1.8A to 0 - 132A
- Remote programming and
monitoring of voltage and current, Built in RS232/485, Remote sense. Optional IEEE 488.2
interface
-
GEN Series
750W-1500W
- Low noise switched mode design
- Voltage ranges from 0 - 6Vdc to 0
- 600Vdc, Current ranges from 0 - 1.3A to 0 - 200A
- Remote programming and
monitoring of voltage and current, Built in RS232/485, Remote sense
- Optional IEEE 488.2
interface
-
XFR Series
1.2kW-2.8kW
- Low noise switched mode design
- Voltage ranges from 0 - 7.5Vdc to 0
- 600Vdc, Current ranges from 0 - 2A to 0 - 220A
- Remote programming and
monitoring of voltage and current, Remote sense
- Optional IEEE 488.2
interface
-
ZPS Series
3kW-30kW
- Low noise switched mode design
- Voltage ranges from 0 - 20Vdc to 0
- 400Vdc, Current ranges from 0 - 10A to 0 - 400A
- Remote programming and
monitoring of voltage and current, Remote sense, Parallel & master/slave
operation up to 3 units.
- Optional IEEE 488.2 interface with LabVIEW driver
-
LAB/TC Series 10kW-2MW
- Advanced IGBT based design
- Voltage ranges from 0 -
52Vdc to 0
- 1000Vdc, Current ranges from 0 - 13A to 0 - 700A
- Remote programming and
monitoring of voltage and current, Remote sense, Parallel operation up to
2MW, Built in RS232.
- Optional LabVIEW and C/C++
-
-
|
